Performance and Laboratory Reports
about GO 15™

FALEX LOAD CARRYING CAPACITY - ASTM D32333B
Test Criteria: RPM: 290 Gauge: 450 TEMP. (ºF) 120

Sample 1: 100% Valvoline - 10W30

True Load	lbf Gauge	Torque/Initial	Torque/Final	Time/Minutes
300	410	9	10	5
500	670	13	13	1
750	980	17	17	1
1000	1300	23	23	1
1250	1600	*	--	.26 sec.*

*26 seconds would not maintain a 1250 load.

Sample 1 above indicates that premium oil without any additives fails at approximately 1250 true load or 1600 ft-lbs. approximately 26 seconds into a one minute run.

Sample 2: 80% Valvoline - 10W30 and 20% Duralube

True Load	lbf Gauge	Torque/Initial	Torque/Final	Time/Minutes
300	410	7	7	5
500	670	9	10	1
750	980	14	15	1
1000	1300	20	23	1
1250	1600	30	*	.25 sec.*

* Indicates that shear pin broke due to seizures.

Sample 2 above indicates that a premium oil with 20% duralube added which is recommended by Duralube did not improve load capacity over premium oil alone, and failed at approximatly 1250 true lod or 1600 ft-lbs, approximately 25 seconds into a one minute run.

Sample 3: 80% Valvoline - 10W30 and 20% Slick 50

True Load	lbf Gauge	Torque/Initial	Torque/Final	Time/Minutes
300	410	10	11	5
500	670	14	14	1
750	980	19	20	1
1000	1300	29	--	.12 sec.*

* Indicates shear pin broke due to seizure.

Sample 3 above indicates that a premium oil with 20% Slick 50 added which is recommended by
Slick 50 did not improve load capacity over premium oil alone and failed at approximately 1000
true load or 1300 ft-lbs. approximately 12 seconds into a one minute run.

As can be clearly seen, the leading anti-wear technology being sold today by Slick 50, lessons the oils lubricity characteristics.

Sample 4: 93.75% Valvoline - 10W30 and 6.25% Engineous GO 15™

True Load	lbf Gauge	Torque/Initial	Torque/Final	Time/Minutes
300	410	10	11	5
500	670	15	15	1
750	980	19	22	1
1000	1300	22	23	1
1250	1600	26	25	1
1500	1900	27	26	1
1750	2200	28	27	1
2000	2500	28	27	1
2250	2800	30	28	1
2500	3100	30	28	1
2750	3380	32	32	1
3000	3650	36	48	1
3250	3950	63	48	1
3500	4250	50	54	1
3750	4500	59	61	1

Sample 4 above indicates that a premium oil with 6.25% of Engineous GO 15™ added which is
the recommended treatment by Engineous GO 15™, improved load capacity over premium oil
alone and went to the maximum capacity of the test. It continued to run even at the test limit of
4500 ft-lbs. increasing the oils lubricating capability by as much as 50 times.

Dynamometer Results Proven Increases on Performance
	Increased Torque 9.35% Increased Horsepower 9.33% Results May Vary

Next: GO 15™ Estimated Savings

Performance and Laboratory Reports about GO 15™